- Home
- ยป
- Products & Services
- »
- Pneumatic Dot Pin Marking Machine
Pneumatic Dot Pin Marking Machine
Pneumatic Dot Pin Marking Machine Etchon DPM302D
Minimum Order Quantity: 1 Set
Product Brochure
Model | DPM302D |
Power Consumption | 305 W |
Marking Depth | 0.1 - 0.7 mm |
Brand | EtchON |
Marking Speed | 1/3 Alphanumeric per sec |
Marking Accuracy | 0.02 mm |
Power | AC110 - 220V +/- 10%,50Hz |
Relative humidity | 90 % |
Workpiece | HRC62 |
Hitting Frequency | 250 Hz |
Interface | USB 2.0 |
Travel of Marking Head | 300 mm |
Working Temperature | 0-40 Degree C. |
Software | EtchON DPMCAD (7 Inch Standalone Touch Screen / PC based (Optional) |
Inputting Air Pressure | 0.3 - 0.6 mpa |
Marking Scope | 100 x 100 mm |
Indenter hardness | HRA95 |
Specifications :
- This is a Standalone machine is suitable for small and light metal or plastic workpiece.
- This machine is most widely used in Automobile Components and Name plate application as well.
- This machine controller is equipped with Portable standalone 7” Touch Screen Controller.
- This machine supports LINE as DOT engraving, supported by multiple fonts.
- This machine is also equipped with PC based connectivity.
- Marking contains all kinds of characters, alphanumeric, date, numbers, serial no, graph etc.
- Support linear, angular, radial, inverted and mirror marking.
- Supports .SLG, format graphics (Converter .PLT to .SLG enclosed in driver CD).
- Machine is made form fabricated MS Material with Guide Rod Technology
- Data cable is made from Steel Connector with conduit which is also free from oil and dust.
- Manufactured in India with CE Certification.
Technical Specifications:
- Technology : Stepper Driven
- Main Board & LCD Control : EtchON DPMCAD V 9.0L
- Load Linear System : Hiwin (Original)
- Pneumatic Spares : SMC / FESTO / Others (Original)
- Switch and DATA Connector : Steel Base Cover with IP67 / IP45 Norms.
- Indenter Support : EN2, EN3, EN4, EN6, EN4L, EN4LP
- Package : (GW : 65 Kg)
- Base with Column Stand (1)
- Marking Head Assembly (1)
- DATA Cable (1), Foot Switch (1)
- Indenter Set (2) with Other Rest Accessories like Power Cable(1) etc.
- Operation Manual (1), Software Driver CD(1), Shop Floor Instruction Chart (1)
Other Details:
Material : Aluminum, Iron, Copper, Stainless Steel, coated & Plated Metals, Nylon, ABS, PVC, Polycarbonate, Most metallic materials mark well.
Application Industry : Automobile or bodywork of motorcycle, car frame, automotive chassis, engine, and mechanical part, machine tool, metal pipe, gear, pump body, valve, bearing, various hardness plastic products.
Dot Pin Marking Machine EtchON DPM303D
Minimum Order Quantity: 1 Set
Model Number | EtchON DPM303D |
Air Power Request | 6 Bar |
Impact Frequency | 300 Hz |
Communication | USB |
Color | Red and Black |
Marking Possibilities | Line,Arc,Circumference |
Marking Depth | 0.1 - 1 mm |
Material Hardness | 65 HRC |
Brand | EtchON |
Dot Pin Marking Machine EtchON DPM303D, This model is multipurpose Pneumatic Dot Pin Marking Machine suitable for signing on metal material which size could be suitable under the marking head. In this machine system controller supports flat, arc as well as circumferential marking with printing scope 140 x 90 mm and 360 Degree Circumference marking, This machine suitable for dot as well as line marking. The stylus pin dotting on the surface with high frequency and mark logo , it could mark character, alphanumeric ,date , numbers , series No , VIN codes , graphs etc. Here controller is table top with MS fabricated column cover and marking head cover.EtchON Supports MAKE IN INDIA
Specifications :
Material : Aluminum, Iron , Copper, Stainless Steel, Coated or plated material, Nylon, ABS, Poly carbonate, PVC, Most Metallic materials mark well.
Application Industry: Automobile or bodywork of motorcycle, car frame, automotive chassis, engine, and mechanical part, machine tool, metal pipe, gear, pump body, valve, various hardness plastic products.
Pneumatic Dot Pin Marking Machine, EtchON Model DPM 300
Model Name/Number | DPM 300 |
Automation Grade | Semi-Automatic |
Printing Scope | 100*100mm |
Support | Plain,Arc,Dot and Line Marking |
Used for | Auto Serial Number,Grafics and 2D Barcode |
Ø Domestic Series DPM300 ( PC based Controller in Compact size) Ø Stand based machine with PC based controller inbuilt in marking head Ø Printing Scope : 100 mm x 100mm Ø Support Plain/ ArcMarking (Line and Dot marking support) Ø Supports Auto Serial Number, Graphics and 2D Barcode Support Ø Manufactured with Genuine Components like SMC, FESTO Pneumatics Ø IP Norms Switches and Steel Connectors with Print Foot control Switch |
Ø Up and Down Marking Head Travel of 250 mm
Pneumatic Dot Pin Marking Machine Etchon DPM302
Minimum Order Quantity: 1 Set
Product Brochure
Model | Etchon DPM302 |
Power Consumption | 350 W |
Marking Depth | 0.1 - 1 mm |
Brand | EtchON |
Marking Speed | 1/3 Alphanumeric per sec |
Marking Accuracy | 0.02 mm |
Power | AC110 - 220V +/- 10%,50HZ |
Hitting Frequency | 300 Hz |
Marking Scope | 150 x 100 mm |
Indenter hardness | HRA95 |
Workpiece | HRC62 |
Inputting Air Pressure | 0.3 - 0.6 mpa |
Working Temperature | 0-40 Degree C. |
Relative humidity | 90 % |
Software | EtchON DPMCAD ( Touch Screen as well as PC based) |
Interface | USB 2.0 |
- This is a PC based machine is suitable for plain, radial as well as circumference marking.
- This machine is most widely used in automobile components, specially when there is need of marking on peripheral.
- This machine is equipped with Portable Column mounted PC based controller.
- This machine supports LINE as DOT engraving, supported by multiple fonts.
- Marking contains all kinds of characters, alphanumeric, date, numbers, serial no, graph etc.
- Support linear, angular, radial, inverted , mirror and circumference(peripheral) marking.
- Supports .PLT, .SLG, .DWG format graph from AutoCAD or Corel Draw.
- Supports Windows 98, XP, Win7 (32 Bit).
- Machine is made from modular type casing with attractive in design.
- Machine is made from Genuine components like FESTO and SMC whereas buttons used are stands to IP60 norms which is oil and dust proof.
- Data cable is made from Steel Connector with conduit which is also free from oil and dust.
- Machine is equipped with Rotary Fixture with 125mm Diameter Chuck, which suitable for engraving on job diameter 150mm, for large size diameter engraving, machine can be customized on requirement.
- Manufactured in India with CE Certification
Technical Specifications:
- Technology : Stepper Driven
- Main Board : EtchON DPMCAD V 9.0
- Load Linear System : Hiwin (Original)
- Pneumatic Spares : SMC / FESTO (Original)
- Switch and DATA Connector : Steel Base Cover with IP67 / IP45 Norms.
- Indenter Support : EN2, EN3, EN4, EN6, EN4L, EN4LP
- Package : (GW : 75 Kg)
- Base with Column Stand (1)
- Marking Head Assembly (1) with Rotary Fixture (125mm Chuck Size)
- Controller Portable with Column Support(PC based)
- DATA Cable with Conduit (1), Data Cable Rotary (1), Foot Switch (1)
- Indenter Set (2) with Other Rest Accessories like Power Cable(1), USB Cable(1) etc Operation Manual (1), Software Driver CD(1), Shop Floor Instruction Chart (1)
Other Details:
Material : Aluminum, Iron, Copper, Stainless Steel, coated & Plated Metals, Nylon, ABS, PVC, Polycarbonate, Most metallic materials mark well.
Application Industry : Automobile or bodywork of motorcycle, car frame, automotive chassis, engine, and mechanical part, machine tool, metal pipe, gear, pump body, valve, bearing, various hardness plastic products.
Pneumatic Dot Pin Marking Machine Etchon DPM301
Minimum Order Quantity: 1 Set
Product Brochure
Model | Etchon DPM301 |
Marking Depth | 0.1 - 1 mm |
Brand | EtchON |
Marking Accuracy | 0.02 mm |
Marking Speed | 1/3 Alphanumeric per sec |
Power | AC110 - 220V +/- 10%,50Hz |
Hitting Frequency | 300 Hz |
Marking Head Travel | 300 mm |
Marking Scope | 150 x 100 mm |
Indenter hardness | HRA95 |
Workpiece | HRC62 |
Inputting Air Pressure | 350 W |
Working Temperature | 0-40 Degree C. |
Relative humidity | 90 % |
Software | EtchON DPMCAD (PC based) |
Interface | USB 2.0 |
- This is a PC based machine is suitable for small and light metal or plastic workpiece.
- This machine is most widely used in Name plate application and automobile components.
- This machine is equipped with Portable Column mounted PC based controller .
- This machine supports LINE as DOT engraving, supported by multiple fonts.
- Marking contains all kinds of characters, alphanumeric, date, numbers, serial no, graph etc.
- Support linear, angular, radial, inverted and mirror marking.
- Supports .PLT, .SLG, .DWG format graph from AutoCAD or Corel Draw.
- Supports Windows 98, XP, Win7 (32 Bit).
- This machine is made from modular type Aluminum casing which is attractive in design and stands for fast heat liberation.
- Marking Head is made from Genuine components like FESTO and SMC whereas buttons used are stands to IP60 norms which is oil and dust proof with Auto Lubrication Facility.
- Data cable is made from Steel Connector with conduit which is also free from oil and dust.
- Manufactured in INDIA with CE Certification.
Technical Specifications:
- Technology : Stepper Driven
- Main Board : EtchON DPMCAD V 9.0
- Load Linear System : Hiwin (Original)
- Pneumatic Spares : SMC / FESTO (Original)
- Switch and DATA Connector : Steel Base Cover with IP67 / IP45 Norms.
- Indenter Support : EN2, EN3, EN4, EN6, EN4L, EN4LP
- Package : (GW : 75 Kg)
- Base with Column Stand (1)
- Marking Head Assembly (1)
- Controller Portable with Column Support(PC based)
- DATA Cable with Conduit (1), Foot Switch (1)
- Indenter Set (2) with Other Rest Accessories like Power Cable(1), USB Cable(1) etc.
- Software Driver CD with e-Manual(1)
Other Details:
Material : Aluminum, Iron, Copper, Stainless Steel, coated & Plated Metals, Nylon, ABS, PVC, Polycarbonate, Most metallic materials mark well.
Application Industry : Automobile or bodywork of motorcycle, car frame, automotive chassis, engine, and mechanical part, machine tool, metal pipe, gear, pump body, valve, bearing, various hardness plastic products.
Pneumatic Dot Pin Marking Machine Etchon DPM305
Minimum Order Quantity: 1 Set
Product Brochure
Model | Etchon DPM305 |
Power Consumption | 350 W |
Marking Depth | 0.1 - 1 mm |
Brand | EtchON |
Marking Accuracy | 0.02 mm |
Marking Speed | 1/3 Alphanumeric per sec |
Power | AC110 - 220V +/- 10%,50Hz |
Hitting Frequency | 300 Hz |
Marking Scope | 140 x 50 mm |
Indenter hardness | HRA95 |
Workpiece | HRC62 |
Inputting Air Pressure | 0.3 - 0.8 mpa |
Working Temperature | 0-40 Degree C. |
Relative humidity | 90 % |
Software | EtchON DPMCAD ( Touch Screen Software as well as PC based Version) |
Interface | USB 2.0 |
- This is a Standalone 7” Touch Screen Portable Marking Machine suitable for heavy Jobs.
- This machine is most widely used in vehicle chassis marking.
- This machine controller is equipped with Portable standalone 7” LCD Touch Screen.
- Marking Head is equipped with E-Magnet, which is used to hold the workpiece.
- This machine supports LINE as DOT engraving, supported by multiple fonts.
- Marking contains all kinds of characters, alphanumeric, date, numbers, serial no, graph etc.
- Support plain and angular marking on flat surface.
- Supports .SLG format graphics ( .PLT to .SLG converter software will be delivered in CD).
- This machine is made from modular type Aluminum casing which is attractive in design and stands for fast heat liberation.
- Marking Head is made from Genuine components like FESTO and SMC whereas buttons used are stands to IP60 norms which is oil and dust proof.
- Data cable is made from Steel Connector with conduit which is also free from oil and dust.
- Machines are Manufactured in India and it is CE Certified.
Technical Specifications:
- Technology : Stepper Driven
- Main Board & LCD Control : EtchON DPMCAD V 9.0
- Load Linear System : Hiwin (Original)
- Pneumatic Spares : SMC / FESTO (Original)
- Switch and DATA Connector : Steel Base Cover with IP67 / IP45 Norms.
- E-Magnet : 24 Volt
- Indenter Support : EN2, EN4D
- Package : (GW : 14 Kg)
- Marking Head Portable with E-Magnet base (1)
- Controller Portable (Standalone)
- DATA Cable with Conduit (1),
- Indenter Set (2) with Other Rest Accessories like Power Cable(1), USB Cable(1) etc.
- Operation Manual (1), Software Driver CD(1), Shop Floor Instruction Chart (1)
- E-Magnet Base : 24Volts E-Magnet Support with holding force up to 25 Kg
Other Details:
Material : Aluminum, Iron, Copper, Stainless Steel, coated & Plated Metals, Nylon, ABS, PVC, Polycarbonate, Most metallic materials mark well.
Application Industry : Automobile or bodywork of motorcycle, car frame, automotive chassis, engine, and mechanical part, machine tool, metal pipe, gear, pump body, valve, bearing, various hardness plastic products.
Pneumatic Dot Pin Marking Machine Etchon DPM305
Minimum Order Quantity: 1 Set
Product Brochure
Model | Etchon DPM305D |
Power Consumption | 350 W |
Marking Depth | 0.1 - 1 mm |
Brand | EtchON |
Marking Accuracy | 0.02 Mm |
Marking Speed | 1/3 Alphanumeric Per Sec |
Power | AC110 - 220V +/- 10%,50H |
Hitting Frequency | 300 Hz |
Marking Scope | 140 x 50 Mm |
Indenter hardness | HRA95 |
Workpiece | HRC62 |
Inputting Air Pressure | 0.3 - 0.8 Mpa |
Working Temperature | 0-40 Degree C. |
Relative humidity | 90 % |
Software | EtchON DPMCAD ( PC based Software) |
Interface | USB 2.0 |
- This is a PC based Desktop Controller Marking Machine suitable for heavy Jobs.
- This machine is most widely used in vehicle chassis marking.
- This machine controller is equipped with Table top PC based Controller.
- Marking Head is equipped with E-Magnet, which is used to hold the workpiece.
- This machine supports LINE as DOT engraving, supported by multiple fonts.
- Marking contains all kinds of characters, alphanumeric, date, numbers, serial no, graph etc.
- Support plain and angular marking on flat surface.
- Supports .PLT, .SLG, .DWG format graph from AutoCAD or Corel Draw.
- Supports Windows 98, XP, Win7 (32 Bit).
- This machine is made from modular type Aluminum casing which is attractive in design and stands for fast heat liberation.
- Marking Head is made from Genuine components like FESTO and SMC whereas buttons used are stands to IP60 norms which is oil and dust proof.
- Data cable is made from Steel Connector with conduit which is also free from oil and dust.
- Machines are Manufactured in India and it is CE Certified.
Technical Specifications:
- Technology : Stepper Driven
- Main Board & LCD Control : EtchON DPMCAD V 9.0
- Load Linear System : Hiwin (Original)
- Pneumatic Spares : SMC / FESTO (Original)
- Switch and DATA Connector : Steel Base Cover with IP67 / IP45 Norms.
- E-Magnet : 24 Volt
- Indenter Support : EN2, EN4D
- Package : (GW : 14 Kg)
- Marking Head Portable with E-Magnet base (1)
- Controller Portable (PC based)
- DATA Cable with Conduit (1),
- Indenter Set (2) with Other Rest Accessories like Power Cable(1) etc.
- Operation Manual (1), Software Driver CD(1), Shop Floor Instruction Chart (1)
- E-Magnet Base : 24Volts E-Magnet Support with holding force up to 25 Kg
Other Details:
Material : Aluminum, Iron, Copper, Stainless Steel, coated & Plated Metals, Nylon, ABS, PVC, Polycarbonate, Most metallic materials mark well.
Application Industry : Automobile or bodywork of motorcycle, car frame, automotive chassis, engine, and mechanical part, machine tool, metal pipe, gear, pump body, valve, bearing, various hardness plastic products.
Pneumatic Dot Pin Marking Machine Etchon DPM306
Minimum Order Quantity: 1 Set
Product Brochure
Model | EtchON DPM306 |
Power Consumption | 350 W |
Marking Depth | 0.1 - 1 mm |
Brand | EtchON |
Marking Speed | 1/3 Alphanumeric per sec |
Marking Accuracy | 0.02 mm |
Power | AC110 - 220V +/- 10%,50Hz |
Hitting Frequency | 300 Hz |
Marking Scope | 90 x 40 mm |
Indenter hardness | HRA95 |
Workpiece | HRC62 |
Inputting Air Pressure | 0.3 - 0.8 mpa |
Working Temperature | 0-40 Degree C. |
Relative humidity | 90 % |
Software | EtchON DPMCAD ( Touch Screen as well as PC based |
Interface | USB 2.0 |
- This is a Standalone 7” Touch Screen Portable Marking Machine suitable for heavy Jobs.
- This machine is most widely used in vehicle chassis marking and surface job.
- This machine controller is equipped with Portable standalone 7” Touch Screen.
- Marking Head is equipped with support stand, which holds the marking head on job surface
- This machine supports LINE as DOT engraving, supported by multiple fonts.
- Marking contains all kinds of characters, alphanumeric, date, numbers, serial no, graph etc.
- Support plain and angular marking on flat surface.
- Supports .SLG format graphics
- This machine is made from modular type Aluminum casing which is attractive in design and stands for fast heat liberation.
- Marking Head is made from Genuine components like FESTO and SMC whereas buttons used are stands to IP60 norms which is oil and dust proof.
- Data cable is made from Steel Connector with conduit which is also free from oil and dust.
- Machines are Manufactured in India and it is CE Certified.
Technical Specifications:
- Technology : Stepper Driven
- Main Board & LCD Control : EtchON DPMCAD V 9.0L
- Load Linear System : Hiwin (Original)
- Pneumatic Spares : SMC / FESTO (Original)
- Switch and DATA Connector : Steel Base Cover with IP67 / IP45 Norms.
- Indenter Support : EN2, EN4D
- Package : (GW : 14 Kg)
- Marking Head Portable with E-Magnet base (1)
- Controller Portable (Standalone)
- DATA Cable with Conduit (1),
- Indenter Set (2) with Other Rest Accessories like Power Cable(1) etc.
- Operation Manual (1), Software Driver CD(1), Shop Floor Instruction Chart (1)
- E-Magnet Base : Support base with holding force up to 15 Kg
Other Details:
Material : Aluminum, Iron, Copper, Stainless Steel, coated & Plated Metals, Nylon, ABS, PVC, Polycarbonate, Most metallic materials mark well.
Application Industry : Automobile or bodywork of motorcycle, car frame, automotive chassis, engine, and mechanical part, machine tool, metal pipe, gear, pump body, valve, bearing, various hardness plastic products.
Pneumatic Dot Pin Marking Machine Etchon Dpm303
Minimum Order Quantity: 1 Set
Product Brochure
Power Consumption | 350 W |
Brand | EtchON |
Marking Accuracy | 0.02 mm |
Marking Speed | 1/3 Alphanumeric per sec |
Relative Humidity | 90 % |
Software | EtchON DPMCAD (PC based) |
Interface | USB 2.0 |
Travel of Marking Head | 300 mm |
Hitting Frequency | 250 Hz |
Marking Depth | 0.1 - 1 mm (according to hardness workpiece material) |
Marking Scope | 150 x 100 mm with 360 Degree Circumference Marking |
Indenter Hardness | HRA95 |
Workpiece | HRC62 |
Inputting Air Pressure | 0.3 - 0.6 mpa |
Power | AC110 - 220 V +/- 10 %,50 Hz |
Working Temperature | 0-40 Degree C. |
- This is a PC based machine is suitable for plain, radial as well as circumference marking.
- This machine is most widely used in automobile components, specially when there is need of marking on peripheral.
- This machine is equipped with Portable Column mounted PC based controller.
- This machine supports LINE as DOT engraving, supported by multiple fonts.
- Marking contains all kinds of characters, alphanumeric, date, numbers, serial no, graph etc.
- Support linear, angular, radial, inverted , mirror and circumference(peripheral) marking.
- Supports .PLT, .SLG, .DWG format graph from AutoCAD or Corel Draw.
- Supports Windows 98, XP, Win7 (32 Bit).
- Machine is made from modular type casing with attractive in design.
- Machine is made from Genuine components like FESTO and SMC whereas buttons used are stands to IP60 norms which is oil and dust proof.
- Data cable is made from Steel Connector with conduit which is also free from oil and dust.
- Machine is equipped with Rotary Fixture with 125mm Diameter Chuck, which suitable for engraving on job diameter 150mm, for large size diameter engraving, machine can be customized on requirement.
- Manufactured in India with CE Certification
Other Details:
Material : Aluminum, Iron , Copper, Stainless Steel, Coated or plated material, Nylon, ABS, Poly carbonate, PVC, Most Metallic materials mark well.
Application Industry: Automobile or bodywork of motorcycle, car frame, automotive chassis, engine, and mechanical part, machine tool, metal pipe, gear, pump body, valve, various hardness plastic products.
Technical Specifications:
- Technology : Stepper Driven
- Main Board : EtchON DPMCAD V 9.0
- Load Linear System : Hiwin (Original)
- Pneumatic Spares : SMC / FEST
- Switch and DATA Connector : Steel Base Cover with IP67 / IP45 Norms.
- Indenter Support : EN2, EN3, EN4, EN6, EN4L, EN4LP
Package : (GW : 80 Kg)
- Base with Column Stand (1)
- Marking Head Assembly (1) with Rotary Fixture (125mm Chuck Size)
- Controller Portable with Column Support(PC based)
- DATA Cable with Conduit (1), Data Cable Rotary (1), Foot Switch (1)
- Indenter Set (2) with Other Rest Accessories like Power Cable(1), USB Cable(1) etc Operation Manual (1), Software Driver CD(1), Shop Floor Instruction Chart (1)
Pneumatic Dot Pin Marking Machine Etchon Dpm303D
Minimum Order Quantity: 1 Set
Product Brochure
Model | Etchon Dpm303D |
Power Consumption | 350 W |
Marking Depth | 0.1 - 1 mm |
Brand | EtchON |
Marking Speed | 1/3 Alphanumeric per sec |
Marking Accuracy | 0.02 mm |
Power | AC110 - 220V +/- 10%,50Hz |
Hitting Frequency | 250 Hz |
Travel of Marking Head | 300 mm |
Marking Scope | 100 x 100 mm with 360 Degree Circumference Marking |
Indenter hardness | HRA95 |
Workpiece | HRC62 |
Inputting Air Pressure | 0.3 - 0.6 mpa |
Working Temperature | 0-40 Degree C. |
Relative humidity | 90 % |
Software | EtchON DPMCAD (PC based) |
Interface | USB 2.0 |
Specifications:
- This is a PC based machine is suitable for plain, radial as well as circumference marking.
- This machine is most widely used in Automobile Components, specially when there is need of marking on peripheral.
- This machine controller is equipped with Desktop PC based controller.
- This machine supports LINE as DOT engraving, supported by multiple fonts.
- Marking contains all kinds of characters, alphanumeric, date, numbers, serial no, graph etc.
- Support linear, angular, radial, inverted, mirror and circumference(peripherla) marking.
- Supports .PLT, .SLG, .DWG format graph from AutoCAD or Corel Draw.
- Supports Windows 98, XP, Win7 (32 Bit)
- Machine is made form fabricated MS Material with Guide Rod Column Travel
- Data cable is made from Steel Connector with conduit which is also free from oil and dust.
- Machine is equipped with Rotary Fixture with 125mm Diameter Chuck, which suitable for engraving on job diameter 150mm, for large size diameter engraving, machine can be customized on requirement.
- Manufactured in India with CE Certification.
Technical Specifications:
- Technology : Stepper Driven
- Main Board : EtchON DPMCAD V 9.0
- Load Linear System : Hiwin (Original)
- Pneumatic Spares : SMC / FESTO (Original)
- Switch and DATA Connector : Steel Base Cover with IP67 / IP45 Norms.
- Indenter Support : EN2, EN3, EN4, EN6, EN4L, EN4LP
- Package : (GW : 80 Kg)
- Base with Column Stand (1)
- Marking Head Assembly (1) (1) with Rotary Fixture (125mm Chuck Size)
- Controller Portable with Column Support(PC based)
- DATA Cable with Conduit (1), Data Cable Rotary (1), Foot Switch (1)
- Indenter Set (2) with Other Rest Accessories like Power Cable(1) etc.
- Operation Manual (1), Software Driver CD(1), Shop Floor Instruction Chart (1)
Other Details:Material : Aluminum, Iron, Copper, Stainless Steel, coated & Plated Metals, Nylon, ABS, PVC, Polycarbonate, Most metallic materials mark well.
Application Industry : Automobile or bodywork of motorcycle, car frame, automotive chassis, engine, and mechanical part, machine tool, metal pipe, gear, pump body, valve, bearing, various hardness plastic products.
Pneumatic Dot Pin Marking Machine Etchon DPM301D
Minimum Order Quantity: 1 Set
Product Brochure
Model | EtchON DPM301D |
Power Consumption | 350 W |
Marking Depth | 0.1 - 0.7 mm |
Brand | EtchON |
Marking Speed | 1/3 Alphanumeric per sec |
Marking Accuracy | 0.02 mm |
Power | AC110 - 220V +/- 10%,50Hz |
Hitting Frequency | 250 Hz |
Travel of Marking Head | 320 mm |
Marking Scope | 100 x 100 mm |
Indenter hardness | HRC85 |
Workpiece | HRC62 |
Inputting Air Pressure | 0.3 - 0.6 mpa |
Working Temperature | 0-40 Degree C. |
Relative humidity | 90 % |
Software | EtchON DPMCAD (PC based) |
Interface | USB 2.0 |
Specifications:
- This is a PC based machine is suitable for small and light metal or plastic workpiece.
- This machine is most widely used in Automobile Components and Name plate application as well.
- This machine is equipped with Desktop PC based controller.
- This machine supports LINE as DOT engraving, supported by multiple fonts.
- Marking contains all kinds of characters, alphanumeric, date, numbers, serial no, graph etc.
- Support linear, angular, radial, inverted and mirror marking.
- Supports .PLT, .SLG, .DWG format graph from AutoCAD or Corel Draw.
- Supports Windows 98, XP, Win7 (32 Bit).
- Machine is made form fabricated MS Material with Guide Rod Column
- Marking Head is made from Genuine components whereas buttons used are stands to IP60 norms which is oil and dust proof.
- Data cable is made from Steel Connector with conduit which is also free from oil and dust.
- Manufactured in India with CE Certification.
Technical Specifications:Technology : Stepper DrivenMain Board : EtchON DPMCAD V 9.0 Load Linear System : Hiwin (Original) Pneumatic Spares : SMC / FESTO (Original) Switch and DATA Connector : Steel Base Cover with IP67 / IP45 Norms. Indenter Support : EN2, EN3, EN4, EN6, EN4L, EN4LPPackage : (GW : 75 Kg) Base with Column Stand (1)Marking Head Assembly (1) with Rotary Fixture (125mm Chuck Size)Controller Portable with Column Support(PC based) DATA Cable with Conduit (1), Data Cable Rotary (1), Foot Switch (1) Indenter Set (2) with Other Rest Accessories like Power Cable(1), USB Cable(1) etc Operation Manual (1), Software Driver CD(1), Shop Floor Instruction Chart (1)
Other Details:
Material : Aluminum, Iron, Copper, Stainless Steel, coated & Plated Metals, Nylon, ABS, PVC, Polycarbonate, Most metallic materials mark well.
Application Industry : Automobile or bodywork of motorcycle, car frame, automotive chassis, engine, and mechanical part, machine tool, metal pipe, gear, pump body, valve, bearing, various hardness plastic products.
Standalone Rotary Marking Machine EtchON DPMD303L
Minimum Order Quantity: 1 Set
Model | DPM303L |
Voltage | 220 V |
Frequency | 50 Hz |
Marking Depth | 0.1 - 0.8 mm |
Brand | EtchON |
Marking Scope | 150 x 100 mm |
Features:
- Minimal maintenance
- Power efficient
- Sturdy construction
Name Plate Marking Machine
Minimum Order Quantity: 1 Set
Model | EtchON DPM301D |
Voltage | 380 V |
Frequency | 50 Hz |
Marking Depth | 0.1 - 0.8 mm |
Packaging Type | Box |
Other Details:
- Comes in budget
- Total client contentment
- Ensure better marking results
Specifications:
- Controller : PC Based (Column Mounted Portable Type) / 7" Standalone LCD controller (Optional)
- Marking Speed : 2/3 Characters/s
- Marking Scope : 100 x 100 mm / 150 X 100 MM
- Pinhead Hardness : HRA92 Work piece Hardness allowed : =< HRC62
- Material : Aluminum, Iron , Copper, Stainless Steel, Coated or plated material, Nylon, ABS, Poly carbonate, PVC, Most Metallic materials mark well
- Application Industry: Automobile or bodywork of motorcycle, car frame, automotive chassis, engine, and mechanical part, machine tool, metal pipe, gear, pump body, valve, various hardness plastic products
Portable Dot Pin Marking Machine EtchON DPM305D
Minimum Order Quantity: 1 Set
Model Number | EtchON DPM305D |
Brand | EtchON |
Marking Depth | 0.1 - 1.5 mm |
Head Weight | 8 kg |
Packaging Type | Box |
Other Details:
Material : Aluminum, Iron , Copper, Stainless Steel, Coated or plated material, Nylon, ABS, Poly carbonate, PVC, Most Metallic materials mark well.
Application Industry: Automobile or bodywork of motorcycle, car frame, automotive chassis, engine, and mechanical part, machine tool, metal pipe, gear, pump body, valve, various hardness plastic products. The products which are not easy to move.
Pneumatic Dot Pin Marking Machine, EtchON DPM 300L
Model Name/Number | DPM 300L |
Printing scope | 100*100 |
Supports | Plain,Arc,Line and Dot marking |
Ø Domestic Series DPM300 ( PC based Controller in Compact size) Ø Stand based machine with PC based controller inbuilt in marking head Ø Printing Scope : 100 mm x 100mm Ø Support Plain/ ArcMarking (Line and Dot marking support) Ø Supports Auto Serial Number, Graphics and 2D Barcode Support Ø Manufactured with Genuine Components like SMC, FESTO Pneumatics Ø IP Norms Switches and Steel Connectors with Print Foot control Switch |
Ø Up and Down Marking Head Travel of 250 mm